Description
Clean Instruments CS8050D Multi-probe: pH/ORP/Conductivity/Dissolved Oxygen/Temperature, 12 VDC, RS485
| Order number | CS8050D |
| Specifications | |
| pH range | 0 – 14 |
| Zero point(pH) | 7.00 ± 0.25 |
| Resolution | 0.01pH |
| Reference system: | SNEX Ag/ AgCl/ KCl |
| Liquid junction: | SNEX |
| ORP range | -2000mV – 2000mV |
| Resolution | 1mV |
| Accuracy: | ±1mV |
| Membrane: | Pt |
| Liquid junction: | SNEX |
| Conductivity | 1.0 μS/cm～ 20.00 mS/cm |
| Resolution: | 0.1 μS/cm～ 0.01 mS/cm |
| Cell constant | K=1.0 |
| Temperature coefficient | 0.00 %~10.00 % |
| TDS | 1.0 ppm～ 10.00 ppt |
| Resolution | 0.1 ppm～ 0.01 ppt |
| TDS factor | 0.40～ 1.0 |
| Salinity | 0.0～ 16.0 g/L |
| Resolution | 0.1 g/L |
| Accuracy | ±0.5% FS |
| Salinity factor | 0.2~0.8 Factory default(0.60) |
| Liquid junction | Glass , Pt |
| Dissolved Oxygen | 0.0-400.0%,0.00-40.00 mg/L |
| Resolution | 0.1%，0.01 mg/L |
| Accuracy | ±0.2% FS |
| Pressure | +20 ~ -10 bar |
| Method | Polarography |
| Salinity Compensation | 0.0～50.0 ppt |
| Tempe.Compensation | 0.0～50.0 °C |
| Pressure Compensation | 600～2000 mBar |
| Response time: | < 60 s (95%，25 °C) |
| Stabilization time: | 15 – 20 min |
| Zero drift | <0.5% |
| Temperature | 0 – 60 °C |
| Accuracy | ± 0.5 °C |
| Unit | °C |
| Shaft material | POM |
| Size | Φ72 x 205 mm |
| Weight | 1.0 Kg |
| Sensor cap | NPT 1″ |
| Cable | 5m |
| Connector | terminals |
| Communication | RS-485 Modbus RTU |
| interface / Protocol | DC 12~24V |
| Power input | pH,ORP,Conductivity, TDS, Salinity, |
| Output | Dissolved Oxygen, Temperature |
| IP rated | IP68 |
